---

OVP Peripheral Model: ArmTzpcBP147

---

Model Specific Information

This page provides introductory usage information for an Imperas OVP peripheral behavioral model. The page is split into sections providing specific information for this peripheral, including any ports for connecting into a platform, registers, other component parts, and configuration options and general information for peripheral modeling with Imperas OVP.

Description

ARM BP147 TrustZone Protection Controller.

There are 24 output net ports (TZPCDECPROT0_0 thru TZPCDECPROT2_7) corresponding to the 24 enables defined as 3 banks of 8 enables.

Each net port may be used to drive a net connected to a peripheral such as the DynamicBridge which can enable/disable a BusBridge mapping under control of an input net.

Licensing

Open Source Apache 2.0

Reference

ARM PrimeCell Infrastructure AMBA3 TrustZone Protection Controller (BP147) Technical Overview (ARM DTO 0015)

Location

The TzpcBP147 peripheral model is located in an Imperas/OVP installation at the VLNV: arm.ovpworld.org / peripheral / TzpcBP147 / 1.0.

---

Net Ports

This model has the following net ports:

Table : Net Ports

---

Bus Slave Ports

This model has the following bus slave ports:

Bus Slave Port: bport1

Table 1: Bus Slave Port: bport1

Table 2: Bus Slave Port: bport1 Registers:

---

Platforms that use this peripheral component

Peripheral components can be used in many different platforms, including those developed by Imperas or by other users of OVP. You can use this peripheral in your own platforms.

Table 3: Publicly available platforms using peripheral 'TzpcBP147'