OVP Peripheral Model: FreescaleKinetisCRC
Model Specific Information
This page provides introductory usage information for an Imperas OVP peripheral behavioral model.
The page is split into sections providing specific information for this peripheral,
including any ports for connecting into a platform, registers, other component parts, and configuration options and general information for peripheral modeling with Imperas OVP.
Description
Model of the CRC peripheral used on the Freescale Kinetis platform
Limitations
Provides the base behaviour for the OVP Freescale Kinetis platforms
Reference
www.freescale.com/Kinetis
Licensing
Open Source Apache 2.0
Location
The KinetisCRC peripheral model is located in an Imperas/OVP installation at the VLNV: freescale.ovpworld.org / peripheral / KinetisCRC / 1.0.
Net Ports
This model has the following net ports:
Table : Net Ports
Name | Type | Must Be Connected | Description |
---|
Reset | input | F (False) | |
Bus Slave Ports
This model has the following bus slave ports:
Bus Slave Port: bport1
Table 1: Bus Slave Port: bport1
Name | Size (bytes) | Must Be Connected | Description |
---|
bport1 | 0x1000 | F (False) | |
Table 2: Bus Slave Port: bport1 Registers:
Name | Offset | Width (bits) | Description | R/W | is Volatile |
---|
ab_CRC | 0x0 | 32 | CRC Data Register, offset: 0x0 | | |
ab_GPOLY | 0x4 | 32 | CRC Polynomial Register, offset: 0x4 | | |
ab_CTRL | 0x8 | 32 | CRC Control Register, offset: 0x8 | | |
Platforms that use this peripheral component
Peripheral components can be used in many different platforms, including those developed by Imperas or by other users of OVP. You can use this peripheral in your own platforms.
Table 3: Publicly available platforms using peripheral 'KinetisCRC'