LIBRARY  |  COMPANIES |   PLATFORMS |   PROCESSORS |   PERIPHERALS
FreescaleKinetisRCM



OVP Peripheral Model: FreescaleKinetisRCM



Model Specific Information

This page provides introductory usage information for an Imperas OVP peripheral behavioral model. The page is split into sections providing specific information for this peripheral, including any ports for connecting into a platform, registers, other component parts, and configuration options and general information for peripheral modeling with Imperas OVP.

Description

Model of the RCM peripheral used on the Freescale Kinetis platform

Limitations

Provides the base behaviour for the OVP Freescale Kinetis platforms

Reference

www.freescale.com/Kinetis

Licensing

Open Source Apache 2.0

Location

The KinetisRCM peripheral model is located in an Imperas/OVP installation at the VLNV: freescale.ovpworld.org / peripheral / KinetisRCM / 1.0.



Net Ports

This model has the following net ports:

Table : Net Ports

NameTypeMust Be ConnectedDescription
ResetinputF (False)



Bus Slave Ports

This model has the following bus slave ports:

Bus Slave Port: bport1

Table 1: Bus Slave Port: bport1

NameSize (bytes)Must Be ConnectedDescription
bport10x1000F (False)

Table 2: Bus Slave Port: bport1 Registers:

NameOffsetWidth (bits)DescriptionR/Wis Volatile
ab_SRS00x08System Reset Status Register 0, offset: 0x0
ab_SRS10x18System Reset Status Register 1, offset: 0x1
ab_RPFC0x48Reset Pin Filter Control Register, offset: 0x4
ab_RPFW0x58Reset Pin Filter Width Register, offset: 0x5
ab_MR0x78Mode Register, offset: 0x7



Platforms that use this peripheral component

Peripheral components can be used in many different platforms, including those developed by Imperas or by other users of OVP. You can use this peripheral in your own platforms.

Table 3: Publicly available platforms using peripheral 'KinetisRCM'

Platform NameVendor
FreescaleKinetis60freescale.ovpworld.org
FreescaleKinetis64freescale.ovpworld.org



FreescalePeripherals
Page was generated in 0.0122 seconds