LIBRARY  |  COMPANIES |   PLATFORMS |   PROCESSORS |   PERIPHERALS

Revision [137712]

The oldest known version of this page was edited on 2019-11-22 10:15:01 by LibraryAdminiStrator
PublicDemonstrator



OVP Virtual Platform: PublicDemonstrator

This page provides detailed information about the OVP Virtual Platform Model of the safepower.ovpworld.org PublicDemonstrator platform.

Licensing

Open Source Apache 2.0

Description

This module implements the Safepower Public Demonstrator. This is very close to teh Xilinx zc702 board defintion. It adds some additional I/O devices. This module provides the board level definition and the instantiation of a Zynq and memory.

Limitations

Currently this module is not used. It instances the Zynq module only.

Reference

SafePower project Public Demonstrator

Description

The configuration file for LED and Switch usage

Location

The PublicDemonstrator virtual platform is located in an Imperas/OVP installation at the VLNV: safepower.ovpworld.org / module / PublicDemonstrator / 1.0.

Platform Summary

Table : Components in platform

TypeInstanceVendorComponent
Peripheralpmbus1ti.ovpworld.orgucd9248
Peripheralpmbus2ti.ovpworld.orgucd9248
Peripheralpmbus3ti.ovpworld.orgucd9248
ModuleZynqxilinx.ovpworld.orgZynq
Busi2cBus(builtin)address width:16

Platform Simulation Attributes

Table 1: Platform Simulation Attributes

AttributeValueDescription
stoponctrlcstoponctrlcStop on control-C



Sub-Module [xilinx.ovpworld.org/module/Zynq/1.0] instance: Zynq

Table 2: Sub-Module Instance 'Zynq' Connections

Port TypePort NameConnection
busportextPortI2Ci2cBus



Peripheral Instances



Peripheral [ti.ovpworld.org/peripheral/ucd9248/1.0] instance: pmbus1

Description

Texas Instruments UCD9248 peripheral

Licensing

Open Source Apache 2.0

Limitations

This model was created to satisfy the requirement of the European SafePower Project
This model implements a basic interface allowing temperature monitor values on the SafePower projects utilization of zc706 boards.

Reference

Device information from http://www.ti.com/lit/ds/symlink/ucd9248.pdf with PMBUS Command Information from http://www.ti.com/lit/ug/sluu337/sluu337.pdf

There are no configuration options set for this peripheral instance.



Peripheral [ti.ovpworld.org/peripheral/ucd9248/1.0] instance: pmbus2

Description

Texas Instruments UCD9248 peripheral

Licensing

Open Source Apache 2.0

Limitations

This model was created to satisfy the requirement of the European SafePower Project
This model implements a basic interface allowing temperature monitor values on the SafePower projects utilization of zc706 boards.

Reference

Device information from http://www.ti.com/lit/ds/symlink/ucd9248.pdf with PMBUS Command Information from http://www.ti.com/lit/ug/sluu337/sluu337.pdf

There are no configuration options set for this peripheral instance.



Peripheral [ti.ovpworld.org/peripheral/ucd9248/1.0] instance: pmbus3

Description

Texas Instruments UCD9248 peripheral

Licensing

Open Source Apache 2.0

Limitations

This model was created to satisfy the requirement of the European SafePower Project
This model implements a basic interface allowing temperature monitor values on the SafePower projects utilization of zc706 boards.

Reference

Device information from http://www.ti.com/lit/ds/symlink/ucd9248.pdf with PMBUS Command Information from http://www.ti.com/lit/ug/sluu337/sluu337.pdf

There are no configuration options set for this peripheral instance.



Page was generated in 0.0241 seconds