OVP Virtual Platform: PublicDemonstrator
This page provides detailed information about the OVP Virtual Platform Model of the
safepower.ovpworld.org PublicDemonstrator platform.
Licensing
Open Source Apache 2.0
Description
This module implements the Safepower Public Demonstrator.
This is very close to teh Xilinx zc702 board defintion. It adds some additional I/O devices.
This module provides the board level definition and the instantiation of a Zynq and memory.
Limitations
Currently this module is not used. It instances the Zynq module only.
Reference
SafePower project Public Demonstrator
Description
Formal parameter configfile provides the configuration file for LED and Switch usage
Location
The PublicDemonstrator virtual platform is located in an Imperas/OVP installation at the VLNV: safepower.ovpworld.org / module / PublicDemonstrator / 1.0.
Platform Summary
Table : Components in platform
Platform Simulation Attributes
Table 1: Platform Simulation Attributes
Attribute | Value | Description |
---|
stoponctrlc | stoponctrlc | Stop on control-C |
Sub-Module [xilinx.ovpworld.org/module/Zynq/1.0] instance: Zynq
Table 2: Sub-Module Instance 'Zynq' Connections
Port Type | Port Name | Connection |
---|
busport | extPortI2C | i2cBus |
Peripheral Instances
Peripheral [ti.ovpworld.org/peripheral/ucd9248/1.0] instance: pmbus1
Description
Texas Instruments UCD9248 peripheral
Licensing
Open Source Apache 2.0
Limitations
This model was created to satisfy the requirement of the European SafePower Project
This model implements a basic interface allowing temperature monitor values on the SafePower projects utilization of zc706 boards.
Reference
Device information from http://www.ti.com/lit/ds/symlink/ucd9248.pdf with PMBUS Command Information from http://www.ti.com/lit/ug/sluu337/sluu337.pdf
There are no configuration options set for this peripheral instance.
Peripheral [ti.ovpworld.org/peripheral/ucd9248/1.0] instance: pmbus2
Description
Texas Instruments UCD9248 peripheral
Licensing
Open Source Apache 2.0
Limitations
This model was created to satisfy the requirement of the European SafePower Project
This model implements a basic interface allowing temperature monitor values on the SafePower projects utilization of zc706 boards.
Reference
Device information from http://www.ti.com/lit/ds/symlink/ucd9248.pdf with PMBUS Command Information from http://www.ti.com/lit/ug/sluu337/sluu337.pdf
There are no configuration options set for this peripheral instance.
Peripheral [ti.ovpworld.org/peripheral/ucd9248/1.0] instance: pmbus3
Description
Texas Instruments UCD9248 peripheral
Licensing
Open Source Apache 2.0
Limitations
This model was created to satisfy the requirement of the European SafePower Project
This model implements a basic interface allowing temperature monitor values on the SafePower projects utilization of zc706 boards.
Reference
Device information from http://www.ti.com/lit/ds/symlink/ucd9248.pdf with PMBUS Command Information from http://www.ti.com/lit/ug/sluu337/sluu337.pdf
There are no configuration options set for this peripheral instance.