LIBRARY  |  COMPANIES |   PLATFORMS |   PROCESSORS |   PERIPHERALS
TiTca6416a



OVP Peripheral Model: TiTca6416a



Model Specific Information

This page provides introductory usage information for an Imperas OVP peripheral behavioral model. The page is split into sections providing specific information for this peripheral, including any ports for connecting into a platform, registers, other component parts, and configuration options and general information for peripheral modeling with Imperas OVP.

Description

Texas Instruments TCA6416A peripheral

Licensing

Open Source Apache 2.0

Limitations

This model was created to satisfy the requirement of the European SafePower Project

This model implements a basic interface allowing XADC channel selection on the SafePower projects utilization of zc702/zc706 boards.

Reference

Device information from http://www.ti.com/lit/ds/symlink/tca6416a.pdf

Location

The tca6416a peripheral model is located in an Imperas/OVP installation at the VLNV: ti.ovpworld.org / peripheral / tca6416a / 1.0.



Net Ports

This model has the following net ports:

Table : Net Ports

NameTypeMust Be ConnectedDescription
xadcmuxoutputF (False)Selects the channel for the XADC interface sample



Bus Slave Ports

This model has the following bus slave ports:

Bus Slave Port: iic

Table 1: Bus Slave Port: iic

NameSize (bytes)Must Be ConnectedDescription
iic0x1T (True)

Table 2: Bus Slave Port: iic Registers:

NameOffsetWidth (bits)DescriptionR/Wis Volatile
reg_reg0x08



Platforms that use this peripheral component

Peripheral components can be used in many different platforms, including those developed by Imperas or by other users of OVP. You can use this peripheral in your own platforms.

Table 3: Publicly available platforms using peripheral 'tca6416a'

Platform NameVendor
zc706xilinx.ovpworld.org



TexasInstrumentsPeripherals
Page was generated in 0.0234 seconds