OVP Peripheral Model: ArmDebugLedAndDipSwitch

Model Specific Information

This page provides introductory usage information for an Imperas OVP peripheral behavioral model. The page is split into sections providing specific information for this peripheral, including any ports for connecting into a platform, registers, other component parts, and configuration options and general information for peripheral modeling with Imperas OVP.


ARM Integrator Board Debug LEDs and DIP Switch Interface


Integrator User Guide Compact Platform Baseboard HBI-0086 (DUI 0159B)


Open Source Apache 2.0


The DebugLedAndDipSwitch peripheral model is located in an Imperas/OVP installation at the VLNV: / peripheral / DebugLedAndDipSwitch / 1.0.

Bus Slave Ports

This model has the following bus slave ports:

Bus Slave Port: bport1

Table : Bus Slave Port: bport1

NameSize (bytes)Must Be ConnectedDescription
bport10x1000F (False)

Table 1: Bus Slave Port: bport1 Registers:

NameOffsetWidth (bits)DescriptionR/Wis Volatile
ab_LED_ALPHA0x032Alphanumeric Characters register
ab_LED_LIGHTS0x432LED Control register
ab_LED_SWITCHES0x832DIP Switch register

Platforms that use this peripheral component

Peripheral components can be used in many different platforms, including those developed by Imperas or by other users of OVP. You can use this peripheral in your own platforms.

Table 2: Publicly available platforms using peripheral 'DebugLedAndDipSwitch'

Platform NameVendor

Page was generated in 0.0134 seconds