LIBRARY  |  COMPANIES |   PLATFORMS |   PROCESSORS |   PERIPHERALS
AtmelPowerSaving



OVP Peripheral Model: AtmelPowerSaving



Model Specific Information

This page provides introductory usage information for an Imperas OVP peripheral behavioral model. The page is split into sections providing specific information for this peripheral, including any ports for connecting into a platform, registers, other component parts, and configuration options and general information for peripheral modeling with Imperas OVP.

Licensing

Open Source Apache 2.0

Limitations

This model is sufficient to boot Linux

Description

This model contains an accurate Register set interface. The functionality has only been implemented to sufficiently boot uClinux for more information visit http://www.atmel.com/products/at91

Reference

Rev. 1354D ARM08/02

Location

The PowerSaving peripheral model is located in an Imperas/OVP installation at the VLNV: atmel.ovpworld.org / peripheral / PowerSaving / 1.0.



Bus Slave Ports

This model has the following bus slave ports:

Bus Slave Port: bp1

Table : Bus Slave Port: bp1

NameSize (bytes)Must Be ConnectedDescription
bp10x4000T (True)

Table 1: Bus Slave Port: bp1 Registers:

NameOffsetWidth (bits)DescriptionR/Wis Volatile
REG_PS_PCSR0xc32
REG_PS_PCDR0x832
REG_PS_PCER0x432
REG_PS_CR0x032



Platforms that use this peripheral component

Peripheral components can be used in many different platforms, including those developed by Imperas or by other users of OVP. You can use this peripheral in your own platforms.

Table 2: Publicly available platforms using peripheral 'PowerSaving'

Platform NameVendor
AtmelAT91SAM7atmel.ovpworld.org
AtmelAT91SAM7atmel.ovpworld.org



AtmelPeripherals
Page was generated in 0.0217 seconds