OVP Peripheral Model: AtmelSpecialFunction
Model Specific Information
This page provides introductory usage information for an Imperas OVP peripheral behavioral model.
The page is split into sections providing specific information for this peripheral,
including any ports for connecting into a platform, registers, other component parts, and configuration options and general information for peripheral modeling with Imperas OVP.
Description
This model contains an accurate Register set interface. The functionality has only been implemented to sufficiently boot uClinux The AT91FR40162SB provides registers that implement the following special functions. Chip Identification RESET Status Protect Mode for more information visit http://www.atmel.com/products/at91
Licensing
Open Source Apache 2.0
Limitations
This model is sufficient to boot Linux
Reference
Rev. 1354D ARM08/02
Location
The SpecialFunction peripheral model is located in an Imperas/OVP installation at the VLNV: atmel.ovpworld.org / peripheral / SpecialFunction / 1.0.
Bus Slave Ports
This model has the following bus slave ports:
Bus Slave Port: bp1
Table : Bus Slave Port: bp1
Name | Size (bytes) | Must Be Connected | Description |
---|
bp1 | 0x4000 | T (True) | |
Table 1: Bus Slave Port: bp1 Registers:
Name | Offset | Width (bits) | Description | R/W | is Volatile |
---|
REG_SF_CIDR | 0x0 | 32 | | | |
REG_SF_EXID | 0x4 | 32 | | | |
REG_SF_RSR | 0x8 | 32 | | | |
REG_SF_PMR | 0x18 | 32 | | | |
Platforms that use this peripheral component
Peripheral components can be used in many different platforms, including those developed by Imperas or by other users of OVP. You can use this peripheral in your own platforms.
Table 2: Publicly available platforms using peripheral 'SpecialFunction'