OVP Peripheral Model: FreescaleKinetisUSBDCD

Model Specific Information

This page provides introductory usage information for an Imperas OVP peripheral behavioral model. The page is split into sections providing specific information for this peripheral, including any ports for connecting into a platform, registers, other component parts, and configuration options and general information for peripheral modeling with Imperas OVP.


Model of the USBDCD peripheral used on the Freescale Kinetis platform


Provides the base behaviour for the OVP Freescale Kinetis platforms



Open Source Apache 2.0


The KinetisUSBDCD peripheral model is located in an Imperas/OVP installation at the VLNV: / peripheral / KinetisUSBDCD / 1.0.

Net Ports

This model has the following net ports:

Table : Net Ports

NameTypeMust Be ConnectedDescription
ResetinputF (False)

Bus Slave Ports

This model has the following bus slave ports:

Bus Slave Port: bport1

Table 1: Bus Slave Port: bport1

NameSize (bytes)Must Be ConnectedDescription
bport10x1000F (False)

Table 2: Bus Slave Port: bport1 Registers:

NameOffsetWidth (bits)DescriptionR/Wis Volatile
ab_CONTROL0x032Control Register, offset: 0x0
ab_CLOCK0x432Clock Register, offset: 0x4
ab_STATUS0x832Status Register, offset: 0x8
ab_TIMER00x1032TIMER0 Register, offset: 0x10
ab_TIMER10x1432TIMER1 Register, offset: 0x14
ab_TIMER20x1832TIMER2 Register, offset: 0x18

Platforms that use this peripheral component

Peripheral components can be used in many different platforms, including those developed by Imperas or by other users of OVP. You can use this peripheral in your own platforms.

Table 3: Publicly available platforms using peripheral 'KinetisUSBDCD'

Platform NameVendor

Page was generated in 0.1526 seconds