OVP Peripheral Model: PhilipsISP1761
Model Specific Information
This page provides introductory usage information for an Imperas OVP peripheral behavioral model.
The page is split into sections providing specific information for this peripheral,
including any ports for connecting into a platform, registers, other component parts, and configuration options and general information for peripheral modeling with Imperas OVP.
Description
Functional Model of USB Philips ISP1761 for Arm Versatile Express platforms. For full details please consult README-OTG.txt
Licensing
Open Source Apache 2.0
Limitations
- Only host mode is supported. - DMA modes are not supported for the moment, only the mandatory slave mode is implemented. - Control and bulk transfer types are currently implemented. No interrupt and isochronous transfers yet. - Tested only the attachment of a single host device. The HSOTG controller's root hub has a single port, so only one device can be attached to it. This device could be a hub, though. Currently we support only one non-hub device. - Hot plug events are currently unsupported.
Reference
Philips/NXP
Location
The ISP1761 peripheral model is located in an Imperas/OVP installation at the VLNV: philips.ovpworld.org / peripheral / ISP1761 / 1.0.
Peripheral Instance Parameters
This model accepts the following parameters:
Table : Peripheral Parameters
Name | Type | Description |
---|
usbDevice | string | USB Device to connect to in host mode. Currently supports 'host:VID:PID' or 'host:BUS-PORT' |
usbHost | string | USB Host to connect to in device mode. Currently supports 'usbip:PORT' |
logfile | string | If set, output packets to logfile in libpcap format. |
Net Ports
This model has the following net ports:
Table 1: Net Ports
Name | Type | Must Be Connected | Description |
---|
hc_irq | output | F (False) | |
Bus Slave Ports
This model has the following bus slave ports:
Bus Slave Port: bport1
Table 2: Bus Slave Port: bport1
Name | Size (bytes) | Must Be Connected | Description |
---|
bport1 | 0x10000 | F (False) | |
Table 3: Bus Slave Port: bport1 Registers:
Name | Offset | Width (bits) | Description | R/W | is Volatile |
---|
ab_CAPLENGTH | 0x0 | 32 | | | |
ab_HCSPARAMS | 0x4 | 32 | | | |
ab_HCCPARAMS | 0x8 | 32 | | | |
ab_USBCMD | 0x20 | 32 | | | |
ab_USBSTS | 0x24 | 32 | | | |
ab_USBINTR | 0x28 | 32 | | | |
ab_FRINDEX | 0x2c | 32 | | | |
ab_CTRLDSSEGMENT | 0x30 | 32 | | | |
ab_CONFIGFLAG | 0x60 | 32 | | | |
ab_PORTSC1 | 0x64 | 32 | | | |
ab_ISO_PTD_DONE | 0x130 | 32 | | | |
ab_ISO_PTD_SKIP | 0x134 | 32 | | | |
ab_ISO_PTD_LAST | 0x138 | 32 | | | |
ab_INT_PTD_DONE | 0x140 | 32 | | | |
ab_INT_PTD_SKIP | 0x144 | 32 | | | |
ab_INT_PTD_LAST | 0x148 | 32 | | | |
ab_ATL_PTD_DONE | 0x150 | 32 | | | |
ab_ATL_PTD_SKIP | 0x154 | 32 | | | |
ab_ATL_PTD_LAST | 0x158 | 32 | | | |
ab_HW_MODE_CTRL | 0x300 | 32 | | | |
ab_HCCHIPID | 0x304 | 32 | | | |
ab_HCSCRATCH | 0x308 | 32 | | | |
ab_SW_RESET | 0x30c | 32 | | | |
ab_HCDMACONFIG | 0x330 | 32 | | | |
ab_HCBUFFSTATUS | 0x334 | 32 | | | |
ab_ATL_DONE_TO | 0x338 | 32 | | | |
ab_MEMORY | 0x33c | 32 | | | |
ab_EDGE_INT_CNT | 0x340 | 32 | | | |
ab_DMA_START | 0x344 | 32 | | | |
ab_PWDN_CTRL | 0x354 | 32 | | | |
ab_HC_INT | 0x310 | 32 | | | |
ab_HC_INT_EN | 0x314 | 32 | | | |
ab_ISOMASKOR | 0x318 | 32 | | | |
ab_INTMASKOR | 0x31c | 32 | | | |
ab_ATLMASKOR | 0x320 | 32 | | | |
ab_ISOMASKAND | 0x324 | 32 | | | |
ab_INTMASKAND | 0x328 | 32 | | | |
ab_ATLMASKAND | 0x32c | 32 | | | |
Platforms that use this peripheral component
Peripheral components can be used in many different platforms, including those developed by Imperas or by other users of OVP. You can use this peripheral in your own platforms.
Table 4: Publicly available platforms using peripheral 'ISP1761'