OVP Peripheral Model: RenesasBcu
Model Specific Information
This page provides introductory usage information for an Imperas OVP peripheral behavioral model.
The page is split into sections providing specific information for this peripheral,
including any ports for connecting into a platform, registers, other component parts, and configuration options and general information for peripheral modeling with Imperas OVP.
Licensing
Open Source Apache 2.0
Description
Renesas BCU Bus Control Unit
Limitations
Register View Model Only
Reference
R01UH0128ED0700, Rev. 7.00, Oct 06, 2010
Location
The bcu peripheral model is located in an Imperas/OVP installation at the VLNV: renesas.ovpworld.org / peripheral / bcu / 1.0.
Bus Slave Ports
This model has the following bus slave ports:
Bus Slave Port: BCUP0
Table : Bus Slave Port: BCUP0
Name | Size (bytes) | Must Be Connected | Description |
---|
BCUP0 | 0x10 | F (False) | |
Table 1: Bus Slave Port: BCUP0 Registers:
Name | Offset | Width (bits) | Description | R/W | is Volatile |
---|
reg0_CSC0 | 0x0 | 16 | | | |
reg0_CSC1 | 0x2 | 16 | | | |
reg0_BPC | 0x4 | 16 | | | |
reg0_BSC | 0x6 | 16 | | | |
reg0_BEC | 0x8 | 16 | | | |
reg1_VSWC | 0xf | 8 | | | |
Platforms that use this peripheral component
Peripheral components can be used in many different platforms, including those developed by Imperas or by other users of OVP. You can use this peripheral in your own platforms.
Table 2: Publicly available platforms using peripheral 'bcu'