OVP Peripheral Model: TiTca6416a
Model Specific Information
This page provides introductory usage information for an Imperas OVP peripheral behavioral model.
The page is split into sections providing specific information for this peripheral,
including any ports for connecting into a platform, registers, other component parts, and configuration options and general information for peripheral modeling with Imperas OVP.
Description
Texas Instruments TCA6416A peripheral
Licensing
Open Source Apache 2.0
Limitations
This model was created to satisfy the requirement of the European SafePower Project
This model implements a basic interface allowing XADC channel selection on the SafePower projects utilization of zc702/zc706 boards.
Reference
Device information from http://www.ti.com/lit/ds/symlink/tca6416a.pdf
Location
The tca6416a peripheral model is located in an Imperas/OVP installation at the VLNV: ti.ovpworld.org / peripheral / tca6416a / 1.0.
Net Ports
This model has the following net ports:
Table : Net Ports
Name | Type | Must Be Connected | Description |
---|
xadcmux | output | F (False) | Selects the channel for the XADC interface sample |
Bus Slave Ports
This model has the following bus slave ports:
Bus Slave Port: iic
Table 1: Bus Slave Port: iic
Name | Size (bytes) | Must Be Connected | Description |
---|
iic | 0x1 | T (True) | |
Table 2: Bus Slave Port: iic Registers:
Name | Offset | Width (bits) | Description | R/W | is Volatile |
---|
reg_reg | 0x0 | 8 | | | |
Platforms that use this peripheral component
Peripheral components can be used in many different platforms, including those developed by Imperas or by other users of OVP. You can use this peripheral in your own platforms.
Table 3: Publicly available platforms using peripheral 'tca6416a'