OVP Peripheral Model: TiUcd9012a

Model Specific Information

This page provides introductory usage information for an Imperas OVP peripheral behavioral model. The page is split into sections providing specific information for this peripheral, including any ports for connecting into a platform, registers, other component parts, and configuration options and general information for peripheral modeling with Imperas OVP.


Texas Instruments UCD9248 peripheral


Open Source Apache 2.0


This model was created to satisfy the requirement of the European SafePower Project

This model implements a basic interface allowing temperature monitor values on the SafePower projects utilization of zc702 boards.


Device information from with PMBUS Command Information from


The ucd9012a peripheral model is located in an Imperas/OVP installation at the VLNV: / peripheral / ucd9012a / 1.0.

Peripheral Instance Parameters

This model accepts the following parameters:

Table : Peripheral Parameters

configstringThe configuration file defining default values and Voltage Monitor names
voutmodeint32Set the value to read for VOUT_MODE (default -12)
statusmfrspecificuns32Set the value to read for STATUS_MFR_SPECIFIC (default 0)

Bus Slave Ports

This model has the following bus slave ports:

Bus Slave Port: iic

Table 1: Bus Slave Port: iic

NameSize (bytes)Must Be ConnectedDescription
iic0x1T (True)

Table 2: Bus Slave Port: iic Registers:

NameOffsetWidth (bits)DescriptionR/Wis Volatile

Platforms that use this peripheral component

Peripheral components can be used in many different platforms, including those developed by Imperas or by other users of OVP. You can use this peripheral in your own platforms.

Table 3: Publicly available platforms using peripheral 'ucd9012a'

Platform NameVendor

Page was generated in 0.0140 seconds