OVP Peripheral Model: XilinxZynq7000TZSecurity

Model Specific Information

This page provides introductory usage information for an Imperas OVP peripheral behavioral model. The page is split into sections providing specific information for this peripheral, including any ports for connecting into a platform, registers, other component parts, and configuration options and general information for peripheral modeling with Imperas OVP.


Zynq 7000 Trust Zone Security Registers


Open Source Apache 2.0


This model implements the set of registers but no behavior.


Zynq-7000 TRM ( and ug1019-zynq-trustzone


The zynq_7000-tz_security peripheral model is located in an Imperas/OVP installation at the VLNV: / peripheral / zynq_7000-tz_security / 1.0.

Bus Slave Ports

This model has the following bus slave ports:

Bus Slave Port: bport1

Table : Bus Slave Port: bport1

NameSize (bytes)Must Be ConnectedDescription
bport10x20T (True)

Table 1: Bus Slave Port: bport1 Registers:

NameOffsetWidth (bits)DescriptionR/Wis Volatile
ab_security2_sdio00x832Trust Zone Slave Security 2 (SDIO0)
ab_security3_sdio10xc32Trust Zone Slave Security 3 (SDIO1)
ab_security4_qspi0x1032Trust Zone Slave Security 4 (QSPI)
ab_security6_apb_slaves0x1832Trust Zone Slave Security 6 (APB Slave)
ab_security7_smc0x1c32Trust Zone Slave Security 7 (SMC)

Platforms that use this peripheral component

Peripheral components can be used in many different platforms, including those developed by Imperas or by other users of OVP. You can use this peripheral in your own platforms.

Table 2: Publicly available platforms using peripheral 'zynq_7000-tz_security'

Platform NameVendor

Page was generated in 0.0134 seconds