OVP Virtual Platform: zc706
This page provides detailed information about the OVP Virtual Platform Model of the
xilinx.ovpworld.org zc706 platform.
Licensing
Open Source Apache 2.0
Description
This module implements the Zynq zc706 Evaluation Board.
This module provides the board level definition and the instantiation of a Zynq and memory.
Limitations
Currently this module is not used. It instances the Zynq module only.
Reference
ZC706 Evaluation Board for the Zynq-7000 XC7Z045 All Programmable SoC UG945 v1.5 September 10, 2014 (ug954-zc706-eval-board-xc7z045-ap-soc) and
Zynq-7000 AP SoC Technical Reference Manual UG585 (v1.10) February 23, 2015 (https://www.xilinx.com/support/documentation/user_guides/ug585-Zynq-7000-TRM.pdf)
Description
Formal parameter configfile provides the configuration file for LED and Switch usage
Location
The zc706 virtual platform is located in an Imperas/OVP installation at the VLNV: xilinx.ovpworld.org / module / zc706 / 1.0.
Platform Summary
Table : Components in platform
Platform Simulation Attributes
Table 1: Platform Simulation Attributes
Attribute | Value | Description |
---|
stoponctrlc | stoponctrlc | Stop on control-C |
Sub-Module [xilinx.ovpworld.org/module/Zynq/1.0] instance: Zynq
Table 2: Sub-Module Instance 'Zynq' Connections
Port Type | Port Name | Connection |
---|
busport | extPortI2C | i2cBus |
netport | extPortXADCMux | xadcmux |
Peripheral Instances
Peripheral [ti.ovpworld.org/peripheral/ucd9012a/1.0] instance: pmbus
Description
Texas Instruments UCD9248 peripheral
Licensing
Open Source Apache 2.0
Limitations
This model was created to satisfy the requirement of the European SafePower Project
This model implements a basic interface allowing temperature monitor values on the SafePower projects utilization of zc702 boards.
Reference
Device information from http://www.ti.com/lit/ds/symlink/ucd9012a.pdf with PMBUS Command Information from http://www.ti.com/lit/ug/sluu337/sluu337.pdf
There are no configuration options set for this peripheral instance.
Peripheral [ti.ovpworld.org/peripheral/tca6416a/1.0] instance: i2cmux
Description
Texas Instruments TCA6416A peripheral
Licensing
Open Source Apache 2.0
Limitations
This model was created to satisfy the requirement of the European SafePower Project
This model implements a basic interface allowing XADC channel selection on the SafePower projects utilization of zc702/zc706 boards.
Reference
Device information from http://www.ti.com/lit/ds/symlink/tca6416a.pdf
There are no configuration options set for this peripheral instance.