OVP Peripheral Model: ArmCompactFlashRegs
Model Specific Information
This page provides introductory usage information for an Imperas OVP peripheral behavioral model.
The page is split into sections providing specific information for this peripheral,
including any ports for connecting into a platform, registers, other component parts, and configuration options and general information for peripheral modeling with Imperas OVP.
Description
ARM Versatile Express Compact Flash Interface Registers
Limitations
Programmers View, register model only. Does NOT model functionality, just provides registers to allow code to run.
Reference
ARM Motherboard Express uATX (V2M-P1) Technical Reference Manual (ARM DDI 0447)
Licensing
Open Source Apache 2.0
Location
The CompactFlashRegs peripheral model is located in an Imperas/OVP installation at the VLNV: arm.ovpworld.org / peripheral / CompactFlashRegs / 1.0.
Bus Slave Ports
This model has the following bus slave ports:
Bus Slave Port: bport1
Table : Bus Slave Port: bport1
Name | Size (bytes) | Must Be Connected | Description |
---|
bport1 | 0x1000 | F (False) | |
Table 1: Bus Slave Port: bport1 Registers:
Name | Offset | Width (bits) | Description | R/W | is Volatile |
---|
ab_Reg | 0x0 | 32 | | | |
Platforms that use this peripheral component
Peripheral components can be used in many different platforms, including those developed by Imperas or by other users of OVP. You can use this peripheral in your own platforms.
Table 2: Publicly available platforms using peripheral 'CompactFlashRegs'